Jan 4, 2009

at last

At last I bought the YBR125. 
I looked for a black one, but couldn't find out, so I bought a white one.
It's a special delux version which have side box.

photo

There are many YBR125SP photos in the Internet cloud, so I took only few
pictures which I wanted to know.

It's the left side box with lock. There is a cover on key hole. 


I opened the cover.


I opened this side box. There is a wire which stops to open too much.


I worried about exhaust gas to hit to rear right turn signal, but the exhaust
nozzle facing right.


Speed and tacho metres. The needle of metres starts from leftside, though
other YBR125's metre needle starts from downside.


The headlight. I didn't ride this at night, so I don't know the performance
of this light.


Under the headlight. There is a horn behind the YAMAHA plate. The horn of
YBR125 Custom is on front frame forward of engine.


The plate is on the neck of frame. it is written about information of mc,
like...

product type:     JYM125-6
engine type:      JYM154FMI
displacement:     123ml
origin:           China
load weight:      134kg
manufacture date: 200705

I was surprised that the body was made 1 year and six month ago.


Around the left foot rest. The shift pedal is seesaw style. There are the
centre stand and the side stand.


But... The side stand doesn't fix well. The gap of body and side stand is
too large. And I feel it isn't good welding.


The decorative parts under the fuel tank, looks like air cleaner cover.
There is a Rectifier in this left part. 


Left side of the engine.


The fuel cock. There is a filter in it.


The carburettor. There is a choke lever at side of the carburettor.


The passenger foot rest. I thought the base part of passenger foot rest
is only for YBR125SP, but I saw a same one at YBR125 Custom. So it isn't
exclusive part.


The left side cover with key lock. There is a cover on key hole, same as
side box.


Opened the this cover. You can see a battery and a tool set.


Battery is marked 'Tongyee Industrial' and 'Japan Storage Battery'. Japan
Storage Battery has amalgamated with the Yuasa Battery now. 'GS' is the
initial of founder of Japan Storage Battery.


The tool set. Nowadays almost a tool set isn't attachments of motorcycles
in Japan. But it's not Japanese version.


The sissy bar. It's hard than I thought. I noticed that this is an obstacle
to fit the top case. A solution to fit the top case is changing this part
to YBR125 Custom(or YBR125SP deluxe type) rear carrier.


Right side of body. You can see the silencer, right foot rest and kick
lever.


Right side cover and kick lever.


The right side cover is fixed by screw. There is the air cleaner inside of
this cover.


Front fork. You can see the reflector and the screw holes of number plate,
that is a proof of made in China.


Front tyre. I found the following characters on it.

CHENG SHIN TIRE
DESIGN IN TAIWAN


Birds view of fuel tank. I felt it's quite big. You can see three stickers,
that is...

WARINIG
EU2(emission control)
CCC(I don't know)


That's all.

key hole

Key hole is at...

ignition
fuel tank cap
left side cover
right side box
left side box

5 place. If you lost the key, you must change 5 key holes. And if a key
hole was broken, you must change 5 key holes or you should have an another
one. It's terrible.

after the ride

Riding position is not so bad, and not so much cruiser style as touring
style.
The engine need a long idle time before ride, it's about few minutes.
I feel a little bit anxiety in summer season.